Flexible Solar Panel-120W
1. Sungold Flexible Solar Panel.
2. Waterproof Flexible Solar Panel.
3. Semi Flexible Solar.
4. Free OEM/ODM quotation.
High efficiency flexible waterproof 120W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems, and complete household solar power systems.
Back-contact solar cells with efficiency up to 22% make this panel ideal for applications where space is restricted, or there are obstructions on the roof. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.
Sungold semi-flexible and suitable for bonding onto the roof of a caravan, motorhome, boats, mobile catering units and sport event trailers.
1. Its maximum bending radius of 30 ° and a thickness of only 4mm;
2. Suitable for curved surface like the deck of a boat or the roof of an RV.
3. With proper installation it is suitable to run over it.
4. Assembly is easy to realize itself with the kit available in our shop or through the 4 connection holes in the corners of the panel .
5. All our flexible solar panels are made up of Class A high efficiency Sunpower U.S.solar cells. These cells reach their high efficiency including through the metal contacts. Moving from the front to the rear and by the broadening of the contacts , there is less loss power.
6. Solar Extension Cable 0.5m and MC4 connectors.
12W Solar Panel Charger
1. 2016 New solar charger.
2. Can charge iphone, ipad,Andriod etc smart devices.
3. 12W Folding Solar Panel.
4. USB solar panel charger
1.With mountain-climbing buckles, the solar panel modules can be fixed on knapsack and other items.
2.To place mobile phones, power banks and other items to be charged.
3. In order to make the module obtaining the maximum output power, the suggestion is adjust the facing direction according to the movement of solar trajectory.
4. The solar module could be fixed on the corresponding items by the inserting the climbing buckle into the 4 holes.
5.The signal light will turn Blue when the charging device connected with the USB output interface through the charging line.
6.When the charging device is full charged, should pull out the charging line from the USB output interface.
1.The panel should be located toward the sunshine where is no hanging branches or obstacles.
2.Unfold the solar module and the position should be facing the sunshine.
3.With overvoltage protection, short-circuit protection and over-retain protection to protect the circut.
5.With super magnet to fix the module when it folding.
1.Do not bend over, although this product do better impact-resistant than normal crystalline silicon and amorphous silicon, also no step and heavy pressure and no scratch with sharp object.
2.Output Voltage will be changed under the different sunlight.
3.While charging the Li-battery, the li-batteries must have circuitry to prevent over charging. Mobile phone and other digital devices have protection board, in making DIY charging equipment, pay attention to protection of lithium batteries.