Q.CELLS Develops 60-Cells Module with Record Performance of 301W

Published July 12th 2012 at 11:25am
Hanwha Q CELLS 

Q.CELLS is the first photovoltaics company in the world to break the 300 wattpeak (Wp) barrier for 60-cells modules. The record performance of 301Wp was confirmed by the independent testing institute SGS (Société Générale de Surveillance) Institut Fresenius in Dresden.

The record-breaking module is based on the Q.ANTUM technology, which is under constant development at Q.CELLS. The base material for the solar cells are 180 μm-thick n-doped monocrystalline silicon wafers. Q.CELLS deposited functional nano-layers onto the rear side of these wafers at its in-house research centre and applied metal contacts using a cost-efficient screen-print technique. Cell efficiency of 20.9% had already been achieved using this same cell architecture at the start of the year. By a conductive adhesive from Sony Chemicals Europe, 60 of these highly efficient solar cells were interconnected and encapsulated. The resulting modules completely eliminate boron-oxygen degradation and show an increased energy yield. Not only do they offer higher performance, but also extreme long term stability.

"Our aspiration is to develop the best technology for today and the innovations of tomorrow," said Karl Heinz Küsters, Head of Technology at Q.CELLS. "The development of this record-breaking module once again underlines our position as a technological leader."

The development work was partly supported by the Federal State of Saxony-Anhalt and the German federal government.


Source: Q.CELLS
ENF Profiles For Companies Mentioned in This Article

Hanwha Q CELLS (Solar Panels): http://www.enfsolar.com/directory/panel/772
Hanwha Q CELLS (Solar System Installers): http://www.enfsolar.com/directory/installer/772
PV industry news is republished free of charge, please send your news to