Chinese supplier high quality 60A MPPT solar ch...

Guangzhou Felicity Solar Technology Co., Ltd.
Technology: MPPT
Product Warranty: 2 Years
Region: China China
Note: Your Enquiry will be sent directly to Guangzhou Felicity Solar Technology Co., Ltd..

Description:

·Peak conversion efficiency of 98%, several seconds tracking speed.
·Adopting temperature compensation , improving the battery lifetime.
·Electronic Protection: over charging, over discharging, overload, short circuit.
·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component.

Product Characteristics

Model No.
FL-CSM-4524
Electrical Data  
Max. Solar Input Power
600 / 1200 / 1800 / 2400 W
Voltage @ Max. Solar Input Power
12 / 24 / 36 / 48 VDC
Max. Solar Panel Open Circuit Voltage
145 V
Nominal System (Battery) Voltage
12 / 24 / 36 / 48 V
Maximum Battery Charge Current
45 A
Peak Conversion Efficiency
98.00 %
General Data  
Dimensions (H/W/D) 
167.6x257.1x82.9 mm
Weight
3.00 Kg
Equalize Charging Voltage
13.5 / 27.0 V
Boost Charging Voltage
13.7 / 27.4 V
Float Charging Voltage
14.3 / 28.6 V
Battery Type Lead Acid (Gel)
Charging Stages Bulk, Absorption, Float
Protection Class IP 20
Operating Temperature Range -20 ~ +45 °C
Humidity 0 - 90 %
Max. Altitude 3000 m
Display LCD
Language English
Temperature Sensor Yes
Cooling Mode Fan
Protection Features  
Protection Features Short Circuit Protection, PV Reverse Polarity Protection, Battery Reverse Polarity Protection, Overload Protection, Over Charging Protection, Over Discharging Protection
Product Introduction

Brief introduction

A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.

Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed. 

Details Show

Features

·Advanced maximum power point tracking technology to optimize using the solar system.

·Excellent thermal design and nature air cooling.

·Peak conversion efficiency of 98%, several seconds tracking speed. 

·Adopting temperature compensation , improving the battery lifetime.

·Electronic Protection: over charging, over discharging, overload, short circuit.

·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component. 

Product Parameters
Model
FL-CSM-4524
FL-CSM-6048
Rated Current
45A
60A
Default Battery System Voltage
12V/24V/36V/48V DC(Auto Detection)
PV Open Circuit Voltage
Operational max=145VDC temperature corrected VOC
PV Array MPPT Voltage Range
16V-120V/32V-150V/48V-150V/64V-150V
Max PV Input Power(12V)
600W
800W
Max PV Input Power(24V)
1200W
1600W
Max PV Input Power(36V)
1800W
2400W
Max PV Input Power(48V)
2400W
3200W
Storage Battery Voltage
Nominal Voltage
12VDC/24VDC/36VDC/48VDC
Absorption Voltage
13.5VDC/27.0VDC/40.5VDC/54.0VDC
Refloat Voltage
13.7VDC/27.4VDC/41.1VDC/54.8VDC
Float Voltage
14.3VDC/28.6VDC/42.9VDC/57.2VDC
low Voltage Protection Point
10.0VDC/20.0VDC/30VDC/40VDC
Display
LED indication
Systematic operation,LV indication,LV protection, over charge protection, loads protection, short circuit protection
LCD display
Charge voltage, charge circuit, voltage of storage battery,capacity of storage battery, output current.
Peak Conversion efficiency
98%
W*H*D(mm)
167.6*257.1*82.9mm
G.W(KG)
3KG

Our Advantages

Our R&D department always concentrate on making the best products for our clients. It makes Felicitysolar always lead the solar business in the market.

Direction Manual

Connection Diagram

Installation Procedure:

Step 1, Choose Mounting Location

Install the Charge Controller in an upright position out of direct sunlight, high temperature, and water.
Step 2, Check for Clearance
Place the mppt controller in the location where it will be mounted. Verify that there is sufficient room to run wires and that there is sufficient room above and below the controller for air flow.

Step 3, Mark Holes
Use a pencil or pen to mark the four mounting hole locations on the wall (mounting surface)
Step 4, Drill Holes
Remove the Charge Controller and drill four size able holes in the marked location.
Step 5, Secure Controller
Insert all W 5/ 16-18 sheet metal screw through each hole and tighten against the wall.

Application Cases

Guangzhou Felicity Solar Technology Co., Ltd.

Xinyang Industrial Park, Third Gangpu Road, Nanling County, Taihe Town, Baiyun District, Guangdong
No. Staff: 500
Send message to this supplier
Felicitysolar was found in 2007 possessed deep pockets and the professional ability of technology and had formed many modern solar panel production lines, LED street light production lines and the testing systems for solar power and lighting.

We cooperate with the partners from Australia、Turkey、Singapore、Serbia、Nigeria, etc. And our products have covered more than 50 countries and markets.

Useful Contacts

Contact Face
Boophi Wang Sales Manager
Contact Face
Rowe Sales Manager
Contact Face
Juki Sales Manager
Contact Face
Wendy Sales Manager
Contact Face
Roy Sales Manager

3 More Series From Guangzhou Felicity Solar Technology Co., Ltd.

  • FL-CSM-6048
    MPPT
  • FL-CSK-6048
    MPPT
  • 30A 12/24V auto PWM solar charge controller for solar system
    PWM