FC01

Swanson Plastics Corporation (SPC)
Type: Fast Cure
Region: Taiwan Taiwan
Note: Your Enquiry will be sent directly to Swanson Plastics Corporation (SPC).

Alternative Product

  • Thickness: 0.5-0.7 mm
  • TYPE: Fast Cure
  • Width: ≤1100 mm
  • Roll Length: 100-150 m
  • VA Content: --
  • Tensile Strength: --
  • Young's Modulus: --
  • Elongation: --
  • Water Absorption (20°C): --
  • Light Transmittance: ≥91 %
  • UV Cut Off Wavelength: --
  • Refractive Index: --
  • Melting Point: --
  • Specific Heat: --

Product Characteristics

Product Characteristics  
Type Fast Cure
Thickness 0.36-0.88 mm
Width ≤2300 mm
Roll Length 65-400 m
VA Content 28 %
Melt Flow Index 18 g/10min
Density 0.95 g/cm3
Hardness (Shore A) 76-79
Gel Content ≥88 %
Stability Characteristics  
Tensile Strength 22 Mpa
Young's Modulus 6 Mpa
Elongation 550 %
Water Absorption (20°C) ≤0.1 % / day
Volume Resistivity >1.0x10 ^14 Ω·cm
UV Aging (Yellowish Index) ≤2 △YI
Optical & Thermal Characteristics  
Light Transmittance ≥91 %
UV Cut Off Wavelength 360 nm
Refractive Index 1.4845
Melting Point 72 °C
Specific Heat 2.3 J/°C·g
Download Manufacturer's PDF

Swanson Plastics Corporation (SPC)

8th Floor, No. 37, Ji-Hu Rd., Nei-Hu Dist., Taipei 114, Taiwan, R. O. C
No. Staff: 770
Parent Company: 台灣聚合化學品股份有限公司(USI Corporation)
Send message to this supplier

Useful Contacts

Contact Face
Huang

1 More Series From Swanson Plastics Corporation (SPC)

  • SC01
    Standard Cure