KPF Cynagard 215A

Amensolar (Suzhou) New Energy Technology Co., Ltd.
Layers: PVDF / PET
Region: China China
Note: Your Enquiry will be sent directly to Amensolar (Suzhou) New Energy Technology Co., Ltd..


(Fluro-skin ® ) one step filming technology. Using Fluorine resin mix with TiO2 and directly coated on PET. Then, you can see a white thin film formed – Fluro skin.It firmly adhere with PET without need to use adhesive chemical. – environmental friendly.

Product Characteristics

Product Characteristics  
Outer(Air)Layer PVDF
Outer(Air)Layer Thickness 22.5 µm
Mid Layer 1 PET
Mid Layer 1 Thickness 262 µm
Total Thickness 300.5±30 µm
Outer(Air)Layer Colour White, Transparent
Inner(Cell)Layer Colour White, Transparent
Stability Characteristics  
Tensile Strength (Length/MD) 100 Mpa
Tensile Strength (Width/TD) 100 Mpa
Elongation (Length/MD) 140 %
Elongation (Width/TD) 110 %
Interlayer Peel Strength ≥4 N/cm
Peel Strength (EVA-Backsheet) ≥40 N/cm
Thermal Shrinkage (Length/MD) ≤1.5 %
Thermal Shrinkage (Width/TD) ≤1.5 %
Moisture Vapour Transmission Rate(MVTR) ≤2 g/m2per day
Optical & Thermal Characteristics  
Partial Discharge Voltage ≥1000 VDC
Breakdown Voltage ≥16 kV

  lower melting point :Main material is polyethylene,melting point of polyethylene is low(120℃),the melting point of inner non-crosslinking EVA is lower 90℃  

 It is a thermoplastic material,  it  shrink and deform when heat subjected.

It is a heat insulation material 

 The adhesive layer which use for compound is insulation material

 The current conventional E film can not fulfill UV 130KWhr spec ,  it as low as to 90KWhr。

+ strong bonding with EVA:over 80N/cm

+ High UV resistance: 260Kwh irradiation

  Yellowing index △b <3 ,

+ Good UV blocking:  2um thicknes can block 280nm~380nm up to 99.45%(Integrating sphere method)     

UV resistance :   Same to T and  K  :  Better uv resistance and partial discharge

High heat dissipation,  :  35% higher than TPT/TPE :  Better  long term module efficiency

High heat resistance: RTI 120℃   :  Longer Heat aging  

Easy to rework:     EVA No residual film    :   lower manufacturing costs

Amensolar (Suzhou) New Energy Technology Co., Ltd.

No. 209, Zhuyuan Road, High Tech Zone, Suzhou, Jiangsu
Send message to this supplier

Useful Contacts

Contact Face
赵成龙 销售
Contact Face
陆卫 总经理

5 More Series From Amensolar (Suzhou) New Energy Technology Co., Ltd.

  • KPf Cynagard465A(R)
    PVDF / PET / Polyolefin
  • KPK Cynagard 09100
  • 1500V
    PVDF / PET
  • Black KPf Cynagard 225A(B)
    PVDF / PET / Coating
  • MPM Cynagard115E(T)
    Polyolefin / PET / Polyolefin