Solar Backsheet Directory

Welcome to the world’s most advanced solar backsheet product directory. Panel manufacturers can use our advanced technical filters to find the exact solar backsheet that match their needs. We have collated backsheet data from manufacturers from all around the world into a common template, allowing you to compare and review backsheets easily. Finally, please also note that on the left side of the page you can select the backsheet layer materials you are looking for.

Browse by

Region

Outer(Air)Layer

Mid Layer

Inner(Cell)Layer

Tensile Strength(Width/TD) ≥

Mpa

Interlayer Peel Strength ≥

N/cm

Thermal Shrinkage(Width/TD) ≤

%

Elongation(Length/MD) ≥

%

Elongation(Width/TD) ≥

%

Partial Discharge Voltage ≥

VDC

Breakdown Voltage ≥

kV

MVTR ≤

g/m2 per day

Width ≥

mm

Weight ≤

g/m2

Solar Backsheet Directory
(98 Individual Backsheet Models)

Backsheet Filters
µm µm
MPa MPa
%
N/cm N/cm
  • Solmate® VTPE1
    Series: Solmate® VTPE1
    Taiflex Scientific
    From $5.80 / m2
    Layers: Polyolefin / PET / Tedlar(PVF) Tensile Strength: --
    Total Thickness: 368±36.8 µm Thermal Shrinkage ≤: --
    Region: Taiwan Taiwan    
    Solmate® VTPE1 is similar to TPT, but better than that with great performance of electric insulation properties and dimensional stability. It has superior results of optical reflectance of white primer layer and excellent UV performance after 2000 hrs at QUV test.
  • TPEw
    Series: TPEw
    Lucky Film
    From $3.80 / m2
    Layers: Tedlar(PVF) / PET / PE Tensile Strength: 110 MPa
    Total Thickness: 347±10 µm Thermal Shrinkage ≤: 1.5 %
    Region: China China    
    FPE-350B has high EVA adhesion performance. It can prevent the breaking and bubbles between the batteries and the backsheet. With the outstanding water vapor impediment nature, it also increase the service life of the batteries.
  • FFC-JW 30 Transparent
    Series: FFC-JW 30 Transparent
    Jolywood (Suzhou) Sunwatt
    Layers: FFC / PET / FFC Tensile Strength: 120 MPa
    Total Thickness: 295±14.75 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    The FFC-JW30 Transparent series has a membrane-adhesive integrated structure (FFC/PET/FFC) with fluorine coated on both sides of the backsheet; it applies the technology of plasma chemical modification and Fluoro-Silicon surface grafting. The transparent backsheet passed 1500h's Damp-heat Testing (85℃ * 85%RH).
  • SP-PE300
    Series: SP-PE300
    HuiZhou Sinpo New Materials
    Layers: PET / EVA Tensile Strength: 130 MPa
    Total Thickness: 300±5 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    SP-PE300 is a kind backsheet with high untraviolet exposure and weather resistance, without yellow discoloration, embrittlement nor delamination.
  • TPT
    Series: TPT
    Hangzhou Ventura Photovoltaic Materials
    From $3.63 / m2
    Layers: PTFE / PET / PTFE Tensile Strength: 180 MPa
    Total Thickness: 280±20 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    PE backsheet can be produced to be white and black, and it consists of two layers, that is PET + EVA. With a strong tensile strength and elongation, it has a strong peel strength with EVA. The width of PE is 0.27 ± 0.02 mm.
  • SCH300
    Series: SCH300
    Shanghai SCH Filmtec
    From $4.64 / m2
    Layers: FEVE / PET Tensile Strength: --
    Total Thickness: 325±25 µm Thermal Shrinkage ≤: --
    Region: China China    
    SCH300 is double fluorocarbon coatings three layers sandwich structure, the outside and inside both are high weathering fluorocarbon coatings, and medium is high performance PET layer. It suits for long life protection of large PV power station.
  • Solmate® TPT
    Series: Solmate® TPT
    Taiflex Scientific
    From $7.50 / m2
    Layers: Tedlar(PVF) / PET / Tedlar(PVF) Tensile Strength: --
    Total Thickness: 350±35 µm Thermal Shrinkage ≤: --
    Region: Taiwan Taiwan    
    Solmate® TPT has great performance of hydrolysis resistance, better properties of electric insulation and breakdown voltage. Its excellent UV performance and water resistance make it applicable to crystalline silicon solar modules.
  • FPE-350CH
    From $4.50 / m2
    Layers: ETFE / PET / PE Tensile Strength: 110 MPa
    Total Thickness: 342±10 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    FPE-350CH has strong anti-ultraviolet performance and weathering resistance. No need of special packing, standing storage. It is consistent with the current laminating process.
  • LBS-CF
    From $6.00 / m2
    Layers: Coating / PET / Coating Tensile Strength: 183 MPa
    Total Thickness: -- Thermal Shrinkage ≤: --
    Region: Korea Korea    
    The CBS-CF was developed for PV module protection under severe weather condition by LGC’s advanced material & adhesion technology. It has higher reflectivity, module efficiency, damp heat property and adhesion reliability.
  • FFC-JW 30 Black
    Series: FFC-JW 30 Black
    Jolywood (Suzhou) Sunwatt
    Layers: FFC / PET / FFC Tensile Strength: 120 MPa
    Total Thickness: 300±15 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    The FFC-JW30 Black series has a membrane-adhesive integrated structure (FFC/PET/FFC) with fluorine coated on both sides of the backsheet; Black backsheet enjoys high heat dissipation. It also applies the technology of plasma chemical modification and Fluoro-Silicon surface grafting.