Solar Panel EVA Directory

Welcome to the world’s most advanced solar EVA product directory. Panel manufacturers can use our advanced technical filters to find the exact solar encapsulant that match their needs. We have collated EVA data from manufacturers from all around the world into a common template, allowing you to compare and review EVA films easily. Finally, please also note that at the top of the page you can select the type of EVA you are looking for (Standard Cure, Fast Cure or Ultra Fast Cure).

Browse by

Region

Thermal Shrinkage (Width /TD) ≤

%

Peel Strength (EVA - Glass) ≥

N/cm

Peel Strength (EVA - Backsheet) ≥

N/cm

Elongation ≥

%

Width ≤

mm

Hardness (Shore A)

to

Gel Content ≥

%

Light Transmittance ≥

%

Melting Point

to °C

Vacuuming Time

to min

Lamination Time

to min

Solar Panel EVA Directory
(110 Individual EVA Models)

EVA Filters
mm mm
%
MPa MPa
  • V2014
    Series: V2014
    Yonggu Insulated Material
    Type: Fast Cure Tensile Strength: --
    Thickness: -- Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
  • EVA for white GG Module-G401W/G403M/G404M
    Type: Fast Cure Tensile Strength: --
    Thickness: 0.53 ~ 0.63 mm Thermal Shrinkage (Length / MD) ≤: 5 %
    Region: China China    
  • PO8110
    Series: PO8110
    3M Renewable Energy
    Type: Fast Cure Tensile Strength: 9.1 MPa
    Thickness: 18 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: United States United States    
  • Conserv PUVT-14 FC
    Type: Fast Cure Tensile Strength: 15 MPa
    Thickness: 0.43 ~ 0.47 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: India India    
  • V-2008B
    Series: V-2008B
    Yonggu Insulated Material
    Type: Fast Cure Tensile Strength: 1980 MPa
    Thickness: 0.3 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: China China    
  • Su406
    Series: Su406
    Hangzhou First PV Material
    Type: Ultra Fast Cure Tensile Strength: --
    Thickness: 0.5 ~ 0.6 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
  • PHOTOCAP®  15585P HLT™
    Type: Ultra Fast Cure Tensile Strength: 15 MPa
    Thickness: -- Thermal Shrinkage (Length / MD) ≤: --
    Region: United States United States    
  • POE for N-Type mono module-P502M/P501W/P502MR
    Type: Fast Cure Tensile Strength: --
    Thickness: 0.5 ~ 0.7 mm Thermal Shrinkage (Length / MD) ≤: 4 %
    Region: China China    
  • NovoVellum® FW01
    Type: Fast Cure Tensile Strength: --
    Thickness: 0.44 ~ 0.48 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: Belgium Belgium    
  • PHOTOCAP®  15505P HLT™
    Type: Ultra Fast Cure Tensile Strength: 18 MPa
    Thickness: -- Thermal Shrinkage (Length / MD) ≤: --
    Region: United States United States