|Power Range:||530 ~ 540 Wp|
1) Thermal Cycles
3) UV protection
4) High voltage
5) Hot Spot
6) Impulse Voltage
7) Humidity and Frost
8) Reverse current overload
9) Grounding Performance
|Product Warranty||12 Years|
|Power Warranty||15 Years of 87.7% Output Power|
|Electrical Data at STC|
|Maximum Power (Pmax)||
|Voltage at Maximum Power (Vmpp)||
|Current at Maximum Power (Impp)||
|Open Circuit Voltage (Voc)||
|Short Circuit Current (Isc)||
|Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C|
|Electrical Data at NOCT|
|Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C|
|Operating Temperature Range||-40~85 °C|
|Temperature Coefficient of Pmax||-0.36 %/°C|
|Temperature Coefficient of Voc||-0.27 %/°C|
|Temperature Coefficient of Isc||0.04 %/°C|
|Maximum System Voltage||1500 V|
|Series Fuse Rating||25 A|
|Panel Dimension (H/W/D)||2280x1135x35 mm|
|Cell Size||182x182 mm|
|Glass Type||Anti-reflection Coating, Tempered|
|Frame Type||Anodized Aluminium Alloy|
|Junction Box Diodes||3|
|Junction Box Protection Class||IP 68|
|Cable Crossection||4 mm2|
|Cable Length||300 mm|
|Download Manufacturer's PDF|
EVVOSOLAR is a premium brand of Solar Panel with our manufacturing base in Tier Son Industrial Zone, Hoan Son Commune, Tien Du District, Bac Ninh Province, Vietnam which focuses on Solar panel manufacturing and covers an area of 40,000 square meters. A Fully automated Solar production line which is Hands free with an annual production capacity of 350 MW and soon expanding to over 500 MW.
Currently, our products include high efficiency monocrystalline, polycrystalline and Mono PERC modules which are certified by CE, TUV, ETL, MCS., BIS. Besides, EVVOSOLAR modules are available for any 3rd party tests and are credited with high efficiency, high stability and reliability and we deliver the modules globally.
EVVOSOLAR will be launching our new SMART Modules with Optimizers inbuilt shortly. Also, our new BIFICIAL AND BIPV line of products.
Our components are handpicked by a team of experienced professionals considering a product life of 25 years with high performance
▪ Toughened glass
The glass used in our module are chemically and controlled thermal heated glass, which is suitable for handling stress in better way.
▪ Junction Boxes
Our junction boxes are potted using high quality adhesive material for a high-quality thermal management. This prevents moisture, dust, corrosion and gives good resistance to shock and vibration. It is IP68 protected.
The module frames are electrochemically anodized and comes with corrosion resistant anodic finish. This gives the module a deeper rich metallic finish and helps to strengthen module to handle physical stress during monitoring and cleaning.
The busbars are made of copper alloys to make them highly conductive and thermal tolerant.