Solar Backsheet Directory

Welcome to the world’s most advanced solar backsheet product directory. Panel manufacturers can use our advanced technical filters to find the exact solar backsheet that match their needs. We have collated backsheet data from manufacturers from all around the world into a common template, allowing you to compare and review backsheets easily. Finally, please also note that on the left side of the page you can select the backsheet layer materials you are looking for.

Browse by

Region

Outer(Air)Layer

Mid Layer

Inner(Cell)Layer

Tensile Strength(Width/TD) ≥

Mpa

Interlayer Peel Strength ≥

N/cm

Thermal Shrinkage(Width/TD) ≤

%

Elongation(Length/MD) ≥

%

Elongation(Width/TD) ≥

%

Partial Discharge Voltage ≥

VDC

Breakdown Voltage ≥

kV

MVTR ≤

g/m2 per day

Width ≥

mm

Weight ≤

g/m2

Solar Backsheet Directory
(107 Individual Backsheet Models)

Backsheet Filters
µm µm
MPa MPa
%
N/cm N/cm
  • Crown BO-L2
    Series: Crown BO-L2
    Crown Advanced Material
    From $1.80 / m2
    Layers: PET / Polyolefin Tensile Strength: 200 MPa
    Total Thickness: 300±30 µm Thermal Shrinkage ≤: 1.5 %
    Region: China China    
    BO-L2 with excellent comprehensive stability is used advanced polyolefin film as the cell side layer, and film with excellent weather resistance as air layer for protection. It can be applied to all kinds of solar PV, especially suitable for power station which has high water resistance requirement.
  • PRESERV E2-  125 WN
    From $3.15 / m2
    Layers: Primer / PET / Primer Tensile Strength: 90 MPa
    Total Thickness: 340 µm Thermal Shrinkage ≤: 1.5 %
    Region: India India    
    PRESERV E2-125 WN is non-fluoro based UV and weather stable white insulation sheet. It can be used as electrical insulator in between ribbons and bus bars in Solar PV module fabrication.
  • ZTT-KPK
    Series: ZTT-KPK
    Zhongtian Photovoltaic Materials
    From $5.52 / m2
    Layers: PVDF / PET / PVDF Tensile Strength: 110 MPa
    Total Thickness: 320±16 µm Thermal Shrinkage ≤: --
    Region: China China    
    The ZTT-KPK has outer storey quality PVDF, stable weather and continuous protection; With proprietary formula PEVA film, good adhesion, high reflective and long-term stability, it can help you achieve optimal cost components.
  • Crown BE-D5
    Series: Crown BE-D5
    Crown Advanced Material
    From $3.95 / m2
    Layers: PVDF / PET / EVA Tensile Strength: 350 MPa
    Total Thickness: 410±41 µm Thermal Shrinkage ≤: 1.5 %
    Region: China China    
    BE-D5 with excellent comprehensive stability is used advanced polyolefin film as the cell side layer, and PVDF film with excellent weather resistance as air layer for protection. It can be applied to all kinds of solar module, especially suitable for power station which has high Partial Discharge performance and Moisture Vapor resistance performance requirement.
  • PRESERV  1 - 125  WD/KD
    From $4.30 / m2
    Layers: PVDF / PET / Primer Tensile Strength: 100 MPa
    Total Thickness: 270 µm Thermal Shrinkage ≤: 1.5 %
    Region: India India    
    PRESERV 1-125WD/KD is Fluoro based UV and weather stable white/black backsheet. It can be used for all crystalline and many Thin Film photovoltaic modules.
  • ZTT-KPE
    Series: ZTT-KPE
    Zhongtian Photovoltaic Materials
    From $4.79 / m2
    Layers: PVDF / PET / PEVA Tensile Strength: 110 MPa
    Total Thickness: 375±10 µm Thermal Shrinkage ≤: --
    Region: China China    
    The ZTT-KPE has high quality PET dielectric grassroots, hydrolysis, anti-embrittlement and stable insulation. Its superior performance to meet worldwide requirements for use in harsh outdoor environments.
  • Crown BE-D2 MG TPE 390A
    Series: Crown BE-D2 MG TPE 390A
    Crown Advanced Material
    From $2.55 / m2
    Layers: PVDF / PET / EVA Tensile Strength: 350 MPa
    Total Thickness: 385±38 µm Thermal Shrinkage ≤: 1.5 %
    Region: China China    
    BE-D2 with excellent comprehensive stability is used advanced polyolefin film as the cell side layer, and import PVDF film with excellent weather resistance as air layer for protection. It can be applied to all kinds of solar module.
  • PRESERV  A - 125  WN/KN
    From $3.30 / m2
    Layers: PET / PET / Primer Tensile Strength: 100 MPa
    Total Thickness: 295 µm Thermal Shrinkage ≤: 1.5 %
    Region: India India    
    PRESERV A-125 WN/KN is non-fluoro based UV and weather stable white/black backsheet. It can be used for all crystalline and many Thin Film photovoltaic modules.
  • SP-FPE325
    Series: SP-FPE325
    HuiZhou Sinpo New Materials
    Layers: FEVE / PET / EVA Tensile Strength: 180 MPa
    Total Thickness: 325±5 µm Thermal Shrinkage ≤: 1 %
    Region: China China    
    SP-FPE325 has a width of 325±5µm. It has low Moisture-Vapor Transmission Rate and strong peeling strength with EVA. It is a series of backsheet without yellow discoloration,delamination, blister nor embrittlement.
  • LBS-CF2
    From $5.00 / m2
    Layers: PVDF / PET / PVDF Tensile Strength: 200 MPa
    Total Thickness: -- Thermal Shrinkage ≤: --
    Region: Korea Korea    
    The LBS-CF2 has more economical and sufficient supply, and also higher UV resistance due to higher fluorine content( 59 wt%). With lower thermal shrinkage, it has good performance under extreme weather.