Solar Panel EVA Directory

Welcome to the world’s most advanced solar EVA product directory. Panel manufacturers can use our advanced technical filters to find the exact solar encapsulant that match their needs. We have collated EVA data from manufacturers from all around the world into a common template, allowing you to compare and review EVA films easily. Finally, please also note that at the top of the page you can select the type of EVA you are looking for (Standard Cure, Fast Cure or Ultra Fast Cure).

Browse by

Region

Thermal Shrinkage (Width /TD) ≤

%

Peel Strength (EVA - Glass) ≥

N/cm

Peel Strength (EVA - Backsheet) ≥

N/cm

Elongation ≥

%

Width ≤

mm

Hardness (Shore A)

to

Gel content, Gel Content ≥

%

Light Transmittance ≥

%

Melting Point

to °C

Vacuuming Time

to min

Lamination Time

to min

Solar Panel EVA Directory
(109 Individual EVA Models)

EVA Filters
mm mm
%
MPa MPa
  • FY10
    Series: FY10
    Feiyu Photoelectricity
    From $1.00 / m2
    Type: Fast Cure Tensile Strength: 15 MPa
    Thickness: 0.3 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 4 %
    Region: China China    
    1. Excellent PID free properties;
    2. Superior weatherability;
    3. Superior anti - Snail - Track performance;
    4. Excellent ahension to glass and backsheet
  • Conserv A360-14FC
    From $1.58 / m2
    Type: Fast Cure Tensile Strength: 15 MPa
    Thickness: 0.4275 ~ 0.4725 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: India India    
    Conserv A 360-14FC is a fast curing, UV and weather stable Ethylene Vinyl Acetate photovoltaic encapsulant that can be used for all Crystalline Silicon and many Thin Film photovoltaic modules.
  • DG-909 Anti-PID
    From $1.01 / m2
    Type: Ultra Fast Cure Tensile Strength: 27 MPa
    Thickness: 0.2 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    1. Fast Cure/ Ultra Fast Cure EVA
    2. Module lamination time can be reduced by at least 50% relative to standard cure encapsulants
    3. Can be used for all crystalline silicon photovoltaic module constructions
    4. The material is self-priming for adhesion to glass
  • FY08
    Series: FY08
    Feiyu Photoelectricity
    From $1.00 / m2
    Type: Fast Cure Tensile Strength: 15 MPa
    Thickness: 0.3 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    1. Excellent PID free properties;
    2. Superior weatherability;
    3. Superior anti - Snail - Track performance;
    4. Excellent ahension to glass and backsheet
  • Conserv A360 -10UC
    From $1.58 / m2
    Type: Fast Cure Tensile Strength: 18 MPa
    Thickness: 0.4275 ~ 0.4725 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: India India    
    Conserv A 360-10UC is a fast curing, UV and weather stable Ethylene Vinyl Acetate photovoltaic encapsulant that can be used for all Crystalline Silicon and many Thin Film photovoltaic modules.
  • DG-808 High Transparent
    From $1.00 / m2
    Type: Ultra Fast Cure Tensile Strength: 26 MPa
    Thickness: 0.2 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    1. Fast Cure/ Ultra Fast Cure EVA
    2. Module lamination time can be reduced by at least 50% relative to standard cure encapsulants
    3. Can be used for all crystalline silicon photovoltaic module constructions
    4. The material is self-priming for adhesion to glass
  •  Conserv P360 - 14 FC
    From $1.58 / m2
    Type: Fast Cure Tensile Strength: 18 MPa
    Thickness: 0.4275 ~ 0.4725 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: India India    
    Conserv P360-14FC is a fast curing, PID Resistant, UV and weather stable Ethylene Vinyl Acetate photovoltaic encapsulant that can be used for all Crystalline Silicon and many Thin Film photovoltaic modules. CONSERV P is specially recommended for modules used in tropical climate conditions.
  • DG-707 Normal
    From $0.992 / m2
    Type: Standard Cure Tensile Strength: 16 MPa
    Thickness: 0.2 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    1. Fast Cure/ Ultra Fast Cure EVA
    2. Module lamination time can be reduced by at least 50% relative to standard cure encapsulants
    3. Can be used for all crystalline silicon photovoltaic module constructions
    4. The material is self-priming for adhesion to glass
  • FM906P
    Series: FM906P
    Hangzhou Fumao PV Material
    From $1.18 / m2
    Type: Fast Cure Tensile Strength: 18 MPa
    Thickness: 0.2 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
  • SV-15296
    Series: SV-15296
    Jiangsu Sveck New Material
    From $1.43 / m2
    Type: Fast Cure Tensile Strength: 18.6 MPa
    Thickness: 0.3 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: 4 %
    Region: China China    

    The SV-15296 EVA film ranges in thickness between 0.3mm and 1.0mm. Rolls are 100m long, with a maximum width of 2200mm. The shift time is 6 months.