Installation Accessories
(217 Individual Installation Accessories)

• The SK4 Solar Connectors are TÜV Certified.

• It is low-smoke and halogen-free, making it suitable for various solar power applications.

• The cable effectively reduces the failure rate and operational costs of photovoltaic systems in the long term.

• It can work with all kinds of trapezoidal metal roof

• It is a rail-less solution, it will help you save some cost and labor costs

• Use anti-aging EPDM rubber to improve the waterproof performance

• Flame Retardant: Comply with the CPR Dca standards for reduced fire spread and smoke emission.

• Water Resistant: Possibility of intermittent, partial flooding by water.

• Halogen Free, E-Beam Crosslink XLPO, AD8 Direct Burial Optional, Anti-Termite.

• Fast installation in under one minute with proprietary welding technology.

• Quadruple-layer coating ensures corrosion resistance, lower cost, higher efficiency, and reduced TCO.

• Resistant to high temperatures, cold, and humidity, perfect for harsh conditions. Certified for 25 years of reliable operation.

• Fast installation in under one minute with proprietary welding technology.

• Quad-layer coating resists corrosion, ensuring stable electrical performance for 25 years.

• The potential difference between copper and aluminum accelerates the oxidation process.

• Pre-assembled to address complex connection issues before shipment.

• They replace the traditional, cumbersome assembly method of copper-aluminum tube crimping.

• The connector is followed by nut locking, with a quick-installation structure that connects copper and aluminum terminals directly.

• This enables fast and convenient copper-to-aluminum connections in photovoltaic power stations and similar applications.

• UV-resistant, radial humidity-resistant, flame-retardant, low-voltage cable.

• Especially suited for outdoor applications due to the very robust outer sheath.

• TÜV Rheinland 2PfG2642 /01.22 certified for protected, steel tape-armored aluminum cables, suitable for fixed underground installation.

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

• E-beam cross-linked compounds

• High resistance against UV, ozone, and hydrolyzation

• High-temperature resistance, materials will not melt or flow

• Flexibility under cold conditions

• Long usable life, expected usable life over 25 years (90°C)

• Applicable to all common connectors

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

• Test up to 1500V / 40A Systems

• Large Display Designed for Reading in Direct Sunlight

• Highest Rated PV Tester on the Market

• Record up to 999 Full Sets of String Data

• Rugged Case Designed for Continuous Site Work

• The single-axis and dual-row design is more economical and easier to operate and maintain.

• Adaptable to various terrains, with a maximum slope of 20%.

• Using LoRa wireless for data transmission results in a longer transmission distance and a more stable signal.

• PV String Open Circuit Voltage Measurement Up To 1500 Vdc

• PV String Short Circuit Current Up To 25 Adc

• Data Transfer – Wireless Updates – Firmware Changes Via The PV: Sync Mobile App

• Internal Memory For Results Storage

• Manual Mode For Diagnostic Testing

• Metal casing with IP65 protection

• Suitable for PV systems under 1000/1500V DC voltage

• Supports one or more outputs

• Easy installation on walls

• Customized design

Ground screw pile is a new type of pile foundation material, which has incomparable superiority advantage compared with traditional ground pile. The patented design is screwed into the ground to replace the concrete independent foundation and strip foundation. The top of ground screw pile is connected with the load.

Solar connectors are single-contact electrical connectors commonly used for connecting solar panels which allow strings of panels to be easily constructed by pushing the connectors from adjacent panels together.

• They replace the traditional, cumbersome assembly method

• The connector is followed by a quick-installation structure that connects copper and aluminum terminals directly.

• This enables fast and convenient copper-to-aluminum connections in photovoltaic power stations and similar applications.

• Non-polar, bidirectional protection, overload protection, and short circuit protection

• Flame-retardant material, high breaking capacity, short arcing

• For use in DC500V/600V/1000V/1500V photovoltaic systems

• Multiple wiring options, compact size, complete accessories

• Suitable for all-terrain including sloping hills and soil types

• Significant cost savings through time taken to construct

• No digging, no excavation, no waste, no concrete or wet trades

• Complete construction and foundation solution

• Fast and accurate insertion of ground screw