IP-06P
Pevafersa SL| Cell Type: | Polycrystalline |
|---|---|
| Power Range: | 3.42~3.87 Wp |
| Region: |
Spain
|
Alternative Product
158.75-MONO-5BB-PID
Hershey-Power
From
€0.142
/ Wp
- Maximum Power: 5.2 W
- Cell Type: Monocrystalline
- Dimensions: 158.75×158.75 mm
- DIAGONAL: --
- Cell Thickness: 190 µm
Product Characteristics
| Model No. |
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product Characteristics | ||||||||||
| Cell Technology | Polycrystalline | |||||||||
| Dimensions | 156×156 mm | |||||||||
| Diagonal | 220 mm | |||||||||
| Cell Thickness | 210 ± 20 µm | |||||||||
| Front Surface (-) | ||||||||||
| No. of Busbars | 2 | |||||||||
| Busbar Width | 2 mm | |||||||||
| Busbar Material | Silver | |||||||||
| Anti Reflection Coating | Silicon nitride | |||||||||
| Back Surface (+) | ||||||||||
| No. of Soldering Pads | 2 | |||||||||
| Soldering Pad Width | 4.5 mm | |||||||||
| Soldering Pad Material | Silver, Aluminium | |||||||||
| Back Surface Field (BSF) | Aluminium | |||||||||
| Electrical Data at STC | ||||||||||
| Maximum Power (Pmax) |
|
|||||||||
| Voltage at Maximum Power Point (Vmpp) |
|
|||||||||
| Current at Maximum Power Point (Impp) |
|
|||||||||
| Open Circuit Voltage (Voc) |
|
|||||||||
| Short Circuit Current (Isc) |
|
|||||||||
| Cell Efficiency |
|
|||||||||
| Fill Factor (FF) |
|
|||||||||
| Thermal Ratings | ||||||||||
| Temperature Coefficient of Pmax | -0.46 %/˚C | |||||||||
| Temperature Coefficient of Voc | -0.36 %/˚C | |||||||||
| Temperature Coefficient of Isc | 0.05 %/˚C |
