Cell Type: | TOPCon |
---|---|
Power Range: | 9.638 Wp |
Region: | China |
High conversion efficiencies resulting in superior power output performance
Outstanding power output even in low-light or high-temperature conditions
Optimized design for ease of soldering and lamination
Long-term stability, reliability, and performance
Low breakage rate
Model No. |
|
|
---|---|---|
Product Characteristics | ||
Cell Technology | TOPCon | |
Dimensions | 210x210 mm | |
Diagonal | 272±5 mm | |
Cell Thickness | 130 µm | |
Front Surface (-) | ||
Busbar Width | 0.03±0.025 mm | |
Busbar Material | Silver | |
Anti Reflection Coating | Titanium dioxide | |
Back Surface (+) | ||
No. of Soldering Pads | 12 | |
Soldering Pad Width | 0.8±0.025 mm | |
Soldering Pad Material | Silver | |
Back Surface Field (BSF) | Aluminium | |
Electrical Data at STC | ||
Maximum Power (Pmax) |
|
|
Voltage at Maximum Power Point (Vmpp) |
|
|
Current at Maximum Power Point (Impp) |
|
|
Open Circuit Voltage (Voc) |
|
|
Short Circuit Current (Isc) |
|
|
Cell Efficiency |
|
|
Fill Factor (FF) |
|
|
Thermal Ratings | ||
Temperature Coefficient of Pmax | -0.25 %/˚C | |
Temperature Coefficient of Voc | -0.3 %/˚C | |
Temperature Coefficient of Isc | 0.045 %/˚C |
Size: 158.75mm × 158.75mm ± 0.25mm (diameter 223mm ± 0.5mm)
Thickness (cell): 190μm ± 20μm
Front (-): Silicon dioxide + blue silicon nitride composite anti-reflective film (PID Free); busbar width: 0.7±0.1 mm, the secondary grid lines are 116; the head of the bus bar is forked, among which 2 spinal Ag bars parallel to each of the busbars.
Back(+): Rear side of bifacial cell: AlOx and SiNx dual layer;18±0.3 mm Ag electrode is embedded in rear bus bar; each Ag electrode is exposed SiNx at both ends as 1.3±0.6mm.
ZOEAST PV is a vertically integrated manufacturer of high-performance solar energy products that convert sunlight into electricity for residential, commercial, and utility-scale power generation. ZOEAST PV plays a leading role in the PV industry through quality with cutting-edge technology and service after sales.
ZOEAST PV has built 30 cells producing line with a capacity of 5 GW cells and 3 GW monocrystalline silicone roads. We are committed to the research of high-efficiency solar cells in our research center and have achieved a new type of solar cell with an efficiency of over 22.9% through protracted and unremitting efforts.
ZOEAST PV keeps product and technics innovation as the competitiveness core of the enterprise and rapid development. As a customer-oriented company, ZOEAST PV keeps product and technics innovation as the competitiveness core of the enterprise and has been appointed by many world-famous solar players as providers. With a focus on quality, professionalism, and services, the Company is dedicated to becoming a trusted market leader in the solar industry.
ZOEAST PV Co., Ltd. is a manufacturer mainly engaged in the production of solar cells and modules, as well as the integration of solar on-grid and off-grid systems and energy storage systems.
It has a 5GW cell production line and a factory with an annual output of 2GW high-quality components. ZOEAST not only pays attention to product quality but also invests a lot of energy in technology research and development. It has established ZOEAST R&D Center and is committed to research and development to improve the conversion efficiency of cells. At present, it has achieved mass production of cells with a conversion efficiency of up to 25%. ZOEAST Photovoltaic focuses on quality, takes technological innovation as the core of enterprise competitiveness, and is oriented by customer needs to provide high-quality solar power services for public utilities and households. Provide the highest quality products and the most perfect after-sales service in the industry.