NovoVellum® HFW01

NovoPolymers NV
Type: Fast Cure
Region: Belgium Belgium
Note: Your Enquiry will be sent directly to NovoPolymers NV.

Alternative Product

From $1.03 / m2
  • Thickness: 0.2-0.8 mm
  • Type: Ultra Fast Cure
  • Width: ≤1300 mm
  • Roll Length: 130-150 m
  • VA Content: 25-28 %
  • Tensile Strength: 26 Mpa
  • Young's Modulus: 4.6 Mpa
  • Elongation: 500 %
  • Water Absorption (20°C): 0.1 %/day
  • Light Transmittance: ≥91 %
  • UV Cut Off Wavelength: 360 nm
  • Refractive Index: 1.48
  • Melting Point: 65-75 °C
  • Specific Heat: --

Product Characteristics

Product Characteristics  
Type Fast Cure
Thickness 0.2-1.1 mm
Width ≤1450 mm
Density 0.95 g/cm3
Hardness (Shore A) 65
Stability Characteristics  
Tensile Strength 5 Mpa
Young's Modulus 50 Mpa
Elongation 350 %
Peel Strength (EVA-Glass) ≥50 N/cm
Volume Resistivity >1.5x10 ^15 Ω·cm
Download Manufacturer's PDF

NovoPolymers NV

Rijksweg 23A, B-2870 Puurs
Send message to this supplier
NovoPolymers manufactures encapsulants combining the best module sealing capabilities and power output optimizations. Our products delivers increased module efficiency and higher module reliability applicable in new technology photovoltaic installations.

Useful Contacts

Contact Face
NovoPolymers

LinkedIn Profiles

5 More Series From NovoPolymers NV

  • NovoVellum® FC05
    Fast Cure
  • NovoVellum® HFU01
    Fast Cure
  • NovoVellum® FW01
    Fast Cure
  • NovoVellum® HFC01
    Fast Cure
  • NovoVellum® HFT01
    Fast Cure