Solar Panel Directory
(12,401 Panel Series / 46,265 Individual Panels)

• The bifacial solar module is especially suitable for ground-mounted and tracker installations

• More performance through innovative N-Type Topcon technology

• Up to 30% more output through bifacial technology

• Enhanced durability

• Increased energy production during adverse weather conditions

• Zero LID

• Anti-PID

• Resistant to harsh environments

• Lower temperature coefficient(-0.29%/℃)

• Excellent low irradiance performance

• 80%-85% bifaciality and up to 30% power gain from the back side

• Lower BOS and LCOE

• Advanced half-cut cells

• Bifacial power gains up to 15%

• Micro gap architecture

• Multi-busbars

• Lower internal resistance

• High mechanical load: 5,400 Pa snow, 2,400 wind loads

• 15-year product 30-year linear power output warranty

• Positive Power Tolerance (0~+5W) Guaranteed

• High Module Conversion Efficiency (up to 22.53%)

• Complete System and Product Certifications

• Solid PID Resistance

• Reduced Resistive Loss With Decreased Operating Current

• Increased Energy Yield With Lower Operating Temperature

High quality, high efficiency solar cells.

Self-cleaning coating decreases maintenance cost and increases the generating capacity.

They have excellent module efficiency even in weak light conditions, such as mornings or cloudy weather.

They have outstanding power output with 25-year performance warranty.

High Efficiency 20%-23%

Wind/Snow Load 2,400Pa/5,400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature, and high humidity areas

• Achieve outstanding efficiency levels

• Minimize the risk of heat spots

• Experience exceptional performance even in low-light conditions

• Enjoy a power tolerance of 0-3%

• Benefit from PID resistance

• Withstand extreme weather conditions

• Generate electricity on both sides for maximum efficiency

• 144 high-quality monocrystalline cells

• A conversion efficiency rating of up to 22.45%

• A total power output range of 570-to-580-watt peak

• Up to 5W positive power output tolerance

• An anodized aluminium alloy and a 3.2mm thick glass

• A 15-year product and 30-year performance warranty

• Lower LCOE, reduced BOS cost, shorter payback time

• Half-cut cells and multi busbars

• Excellent anti-PID performance

• Robust design

• IP68 junction box

• 5,400Pa snow, 2,400Pa wind loads

• 12-year product warranty and 25-year linear power warranty

• TUV certified

• Stable power output with positive+5% tolerance

• Can withstand snow loads of up to 5,400Pa and wind loads of up to 2,400 Pa

• Cutting-edge half-cut PERC cells

• Incorporates 10 busbars for enhanced performance

• Achieves additional power gain from the bifacial design

• Features non-destructive cutting technology

• Lightweight design for simplified installation

• Equipped with an IP68-protected junction box

Power range from 555W to 575W

High conversion efficiency up to 21.68%

PERC technology

Anodized aluminium alloy frame3.2-millimeter high-transmission tempered front glassHighly resistant to PID

effects12-year product warranty, 25-year linear power output warranty

• Bloomberg Tier 1 Brand

• N-Type TOPCon Technology

• Bifacial Power Gain

• Up To 22.57% Module Efficiency

• LID And PID Resistant

• High-Quality Materials, Best Workmanship, German Engineering

• 30-year Linear Performance, 15-year Product Warranty

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5,400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

High power, high efficiency, positive power tolerance

German technology

Most cost-effective products, lower project cost 

Sincerely looking for distributors all over the world

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminium frame using UV-resistant silicon

• ISO 9,001:2,008, ISO 14,001:2,004, OHSAS 18,001

• IEC 61,215, IEC 61,730, safety class II, conformity to CE