Solar Trade Platform and Directory of Solar Companies

Solar Panel Encapsulants Directory

Welcome to the world’s most advanced solar EVA product directory. Panel manufacturers can use our advanced technical filters to find the exact solar encapsulant that match their needs. We have collated EVA data from manufacturers from all around the world into a common template, allowing you to compare and review EVA films easily. Finally, please also note that at the top of the page you can select the type of EVA you are looking for (Standard Cure, Fast Cure or Ultra Fast Cure).

Browse by

Continent 

Thermal Shrinkage (Width /TD) ≤

%

Peel Strength (Encapsulants - Glass) ≥

N/cm

Peel Strength (Encapsulants - Backsheet) ≥

N/cm

Elongation ≥

%

Width ≤

mm

Hardness (Shore A)

to

Gel Content ≥

%

Light Transmittance ≥

%

Melting Point

to °C

Vacuuming Time

to min

Lamination Time

to min

Solar Panel Encapsulants Directory
(112 Individual Encapsulants Models)

Encapsulants Filters
mm mm
%
MPa MPa
  • Anti  PID EVA film  (SV-15296P&SV-15297P)
    Series: Anti PID EVA film (SV-15296P&SV-152...
    Changzhou Sveck Photovoltaic New Materials
    Type: Ultra Fast Cure Tensile Strength: 16 MPa
    Thickness: 0.45 ~ 0.9 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    Anti PID PID EVA film (SV-15,296P&SV-15,297P)
    • Can reduce the risk of component PID
    • Excellent weather resistance (including high temperature, high humidity, ultraviolet, etc.)
    • Low shrinkage to ensure component stability during lamination
    • Fast curing, improve component lamination production efficiency
    • High light transmission to ensure the maximum output power of the module
  • White EVA II  Film (SV-15297W)
    Series: White EVA II Film (SV-15297W)
    Changzhou Sveck Photovoltaic New Materials
    Type: Ultra Fast Cure Tensile Strength: 18 MPa
    Thickness: 0.45 ~ 0.75 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
    WHITE EVA II FILM (SV-15,297W)
    •Excellent durability (including high resistance for temperature, humidity and UV)
    •Transparent EVA on the cell face and white EVA on the back, significantly reduce the ratio of crack during lamination and provide better bonding performance after aging
    •Can be used for G to G solar module, normal solar module and thin film solar module.
  • PO film (SE-556/SE-556&SE-557)
    Series: PO film (SE-556/SE-556&SE-557)
    Changzhou Sveck Photovoltaic New Materials
    Type: Standard Cure Tensile Strength: 18 MPa
    Thickness: 0.3 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: 4 %
    Region: China China    
    PO film (SE-556)
    • Excellent weather resistance (including high temperature, high humidity, UV, etc.);
    • Excellent adhesion after aging;
    • Good maneuverability and stability during lamination;
    • Excellent reflectance, which can significantly increase the power output of the module.
  • Z1261 Extra fast cure Solar Eva Film
    From €1.25 / m2
    Type: Ultra Fast Cure Tensile Strength: 20 MPa
    Thickness: 0.2 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
  • Z1261C encapsulant for flexible solar panel
    From €1.52 / m2
    Type: Fast Cure Tensile Strength: 20 MPa
    Thickness: 0.20 ~ 0.30 mm Thermal Shrinkage (Length / MD) ≤: 5 %
    Region: China China    
  • LW-SS
    Series: LW-SS
    Lightway Solar
    From €1.44 / m2
    Type: Fast Cure Tensile Strength: --
    Thickness: -- Thermal Shrinkage (Length / MD) ≤: --
    Region: China China    
  • Fast Cure Solar Eva Film Anti PID
    From €1.15 / m2
    Type: Fast Cure Tensile Strength: --
    Thickness: 0.20 ~ 0.50 mm Thermal Shrinkage (Length / MD) ≤: --
    Region: China China    
  • EVA-RS45
    Series: EVA-RS45
    Risheng New Material Technology
    From €2.54 / m2
    Type: Ultra Fast Cure Tensile Strength: 15 MPa
    Thickness: 0.45 ~ 0.48 mm Thermal Shrinkage (Length / MD) ≤: 3 %
    Region: China China    
  • EVA film
    Series: EVA film
    REOO Technology
    From €2.40 / m2
    Mike Xu
    Type: Standard Cure Tensile Strength: 18 MPa
    Thickness: 0.45 ~ 0.5 mm Thermal Shrinkage (Length / MD) ≤: 1 %
    Region: China China    
  • Z1261 Excellent of Yellowness Feature
    From €1.28 / m2
    Type: Standard Cure Tensile Strength: 25 MPa
    Thickness: 0.30 ~ 0.80 mm Thermal Shrinkage (Length / MD) ≤: 2 %
    Region: China China    
Related Directories