Solar Panel Encapsulants Directory
Welcome to the world’s most advanced solar EVA product directory. Panel manufacturers can use our advanced technical filters to find the exact solar encapsulant that match their needs. We have collated EVA data from manufacturers from all around the world into a common template, allowing you to compare and review EVA films easily. Finally, please also note that at the top of the page you can select the type of EVA you are looking for (Standard Cure, Fast Cure or Ultra Fast Cure).
Continent
Thermal Shrinkage (Width /TD) ≤
Peel Strength (Encapsulants - Glass) ≥
Peel Strength (Encapsulants - Backsheet) ≥
Elongation ≥
Width ≤
Hardness (Shore A)
Gel Content ≥
Light Transmittance ≥
Melting Point
Vacuuming Time
Lamination Time
Solar Panel Encapsulants Directory
(128 Individual Encapsulants Models)
-
From €1.41 / m2
Type: Fast Cure Tensile Strength: 18 MPa Thickness: 0.3 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: 3 % Region: China 
PO film (SE-556)
• Excellent weather resistance (including high temperature, high humidity, UV, etc.);
• Excellent adhesion after aging;
• Good maneuverability and stability during lamination;
• Excellent reflectance, which can significantly increase the power output of the module.
-
From €0.943 / m2
Type: Fast Cure Tensile Strength: 15 MPa Thickness: 0.45 mm Thermal Shrinkage (Length / MD) ≤: -- Region: India 
PIXON Fast Cure EVA Films are particularly designed for improving the durability and increasing the performance of solar modules and are suitable for all types of crystalline and thin-film PV modules with shorter cycling time that speeds up your module production with excellent transparency, high reflectivity, increased production yield, snail trail resistance, PID-resistance, and so on.
-
From €1.06 / m2
Type: Fast Cure Tensile Strength: 60 MPa Thickness: 0.45 ~ 1 mm Thermal Shrinkage (Length / MD) ≤: 3 % Region: China
High transparency and anti-PID
Low shrinkage, ensuring stable quality during lamination
Excellent adhesion between glass and different types of the back film
Excellent weather resistance (including high temperature, high humidity, and ultraviolet)
-
From €1.48 / m2
Type: Fast Cure Tensile Strength: 20 MPa Thickness: 0.20 ~ 0.30 mm Thermal Shrinkage (Length / MD) ≤: 5 % Region: China
-
From €1.25 / m2
Type: Standard Cure Tensile Strength: 25 MPa Thickness: 0.30 ~ 0.80 mm Thermal Shrinkage (Length / MD) ≤: 2 % Region: China
-
From €0.978 / m2
Type: Ultra Fast Cure Tensile Strength: 15 MPa Thickness: 0.45 mm Thermal Shrinkage (Length / MD) ≤: -- Region: India
-
From €1.02 / m2
Type: Fast Cure Tensile Strength: 15 MPa Thickness: 0.45 ~ 0.8 mm Thermal Shrinkage (Length / MD) ≤: 2 % Region: India
-
From €1.41 / m2
Type: Standard Cure Tensile Strength: 25 MPa Thickness: 0.38 ~ 0.76 mm Thermal Shrinkage (Length / MD) ≤: 3 % Region: China
-
From €1.27 / m2
Type: Fast Cure Tensile Strength: 25 MPa Thickness: 0.3 ~ 0.7 mm Thermal Shrinkage (Length / MD) ≤: 3 % Region: China
1. Excellent PID free properties;
2. Superior weather-ability;
3. Superior anti - Snail - Track performance;
4. Excellent adhesion to glass and back sheet;
5.UV Cut off for good light reflection;
-
From €1.41 / m2
Type: Ultra Fast Cure Tensile Strength: 6 MPa Thickness: -- Thermal Shrinkage (Length / MD) ≤: 3 % Region: China
PO II FLIM (CO-556)
• Excellent durability (including high resistance for temperature, humidity and UV)
• Excellent adhesion after aging test.
• Easy for processing and quality stable during laminating.
• Low shrinkage rate, to make sure the stable quality during laminating.
• Can be used for G to G solar module, normal solar module and thin film solar module.
